How to Take Care of Your Underwater Scooter? - Asiwo Sports

How to Take Care of Your Underwater Scooter?

If you're an avid diver, you may have considered investing in an underwater scooter to help you explore the depths more efficiently. This device can be a game-changer, allowing you to cover more ground and conserve your energy for longer dives.

However, like any piece of equipment, underwater scooters require proper care and maintenance to keep them running smoothly.

In this blog, we'll cover some essential tips on how to take care of your underwater scooter, so you can enjoy your aquatic adventures to the fullest while keeping your equipment in top shape.

Taking Care of Your Underwater Scooter: Pre-Dive Maintenance

Before each dive, it's essential to perform pre-dive maintenance to ensure that your underwater scooter is in good working condition before you enter the rushing waters.

Neglecting pre-dive maintenance can result in damage to the scooter, which may be costly to repair or replace.


Here are some pre-dive underwater scooter maintenance tips:

  • Know the scooter: Before using an underwater scooter, it's important to familiarize yourself with the device to ensure that you operate it the right way. For it, you may read the user manual thoroughly or consult this detailed underwater scooter blog we did.

  • Cleaning the scooter: Use a soft-bristled brush and mild soap to clean the scooter's exterior. Rinse it thoroughly with fresh water.

  • Checking the battery: Check the battery charge level and ensure that it's fully charged before diving. If the battery is damaged, replace it immediately.

  • Inspecting the propellers: Check the propellers for subtle signs of damage, such as chips or cracks. Replace any damaged propellers before diving.

  • Lubricating the O-rings: Apply a thin layer of silicone grease to the O-rings to ensure that they remain supple and don't dry out. This will prevent water from leaking into the scooter's motor compartment.

Taking Care of Your Underwater Scooter: Post-Dive Maintenance

Maintaining your underwater scooter after diving is just as important as pre-dive maintenance. Proper post-dive maintenance helps to extend the life of your scooter and ensures that it is ready for your next dive adventure.

Here are some essential tips to maintain your underwater scooter after a dive:

  • Disassemble and rinse the components: To ensure a thorough cleaning, disassemble your scooter and rinse all the components with fresh water. This will help to remove any salt or sand that may have gotten inside the scooter.

  • Dry the components: Use a soft, absorbent towel to dry all the components thoroughly. Make sure that no water remains inside the motor compartment or battery compartment.

  • Inspect for damage: As you disassemble and dry your scooter, take the opportunity to inspect all the components for any signs of damage. Check the propellers, O-rings, and battery compartment for any cracks, chips, or other damage that may have occurred during your dive.

  • Lubricate the O-rings again: Apply a fresh coat of silicone grease to the O-rings to maintain their suppleness and prevent them from becoming dry.

  • Store the scooter properly: Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures. Make sure that the battery is fully charged before storing it, and that the scooter is stored in a way that will prevent any damage or deformation.

By following these essential steps on how to maintain an underwater sea scooter, you can ensure that your scooter remains in good condition and is ready for your next dive adventure.

Taking Care of Each Part of Your Underwater Scooter

Lastest Blog Post Visualizza tutto